HARD DISK PROBLEM NOT WORKING

 

Model : ST1000LM035-1RK172
Serial : WES35CW5
Firmware : SBM3
Capacity : 1 000 GB (1 953 525 168)

EDAC Value = 00000000FFFFF844

 

 

 

Notes: Customer describes that drive doesn’t recognize any longer. Drive beeps quietly when connected to power supply.

Data Recovery Diagnostic Phase

Step 1: Hard drive connected to TOOL and powered on. Drive correctly identifies and gets into a ready state (DRD & DSC)

Step 2: Backup made of all HDD resources (SA, ROM, tracks, etc.) Successfully completed with no errors.

Step 3: Verify that drive can correctly read sectors (passed check)

Step 4: Create task in Data Extractor to image data onto a new drive.

Step 5: Build head map (0, 1, 2, 3,  )

Step 6: Begin imaging onto new drive. Appears to be reading with very little difficulty, possibly just slow reading sectors in file table.

Notes: Quote customer **** for non clean room recovery. (Price could turn out to be less if very few bad sectors are found).

Data Recovery Update 9-5-2018

Image Created Successfully with only 2 unread sectors. Other sector areas were very slow reading, but were read successfully after multiple passes in various modes.

Customer billed total of **** for non-clean room tier 1 hardware level data recovery.

Data Copied onto new drive and returned to customer.

Have a Similar Hard Drive Needing Data Recovered?

We’d be happy to have a look to see if we can recover the data for you.  The evaluation is always free of charge and quotes are provided up front with no obligation.  If you’re interested please visit the contact page on the menu above to contact a recovery expert who can walk you through the specifics of getting your data back.

RamInfotech Data Recovery

No 24/13, Ground Floor, Pillayar Koil St,

Near R8, Police Station, Vadapalani,

Chennai, Tamil Nadu 600026

http://www.datarecoverychennai.co.in/

CALL US 070921 14422

 

THANK YOU SUPPORT

 

 

Rate this post...
 
Summary