Case study 57- SIMFileFD=FC37D134ErrorCode=43110081DiscLBA=000000000000BBD6Duration=0000048Fms

 SIMFileFD=FC37D134ErrorCode=43110081DiscLBA=000000000000BBD6Duration=0000048Fms
   Model : ST1000LM035-1RK172
  Serial : WQ9B63TN
Firmware : ADM1
Capacity : 1 000 GB (1 953 525 168)

Case study 56-SEAGATE 5TB HDD MCMT table is corrupted

  MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
 MCMT table is corrupted
No HOST FIS-ReadyStatusFlags 0002A1A1
ServoDiscSlip Time = 00000037

Case study 55- SIM Error 1009 RW Error 00000080

 SIM Error 1009
 RW Error 00000080

   Model : ST1000LM010-9YH146
  Serial : Z100V8DY
Firmware : CC9F
Capacity : 1 000 GB (1 953 525 168)

Drive shows correct ID, capacity, ready state, but doesn’t allow to read sectors.

We would like you to pay attention to messages in terminal:

SIM Error 1009

RW Error 00000080

It means that drive has problem with S.M.A.R.T partially with system file 0x017A

Let check it terminal

 

This terminal output means that system file 17A is damaged.

Try to read it

 

We get error when try to read system file

 

Write 17A sys file (you can take it from the link provided at the bottom of the article)

 

File is written and now check the terminal output after power off/on

Drive comes to ready state and doesn’t send error messages in terminal.

And link for a good 17A system file