Case study 42 | WDC WD3200BPVT-24JJ5T0

   Model : WDC WD3200BPVT-24JJ5T0
  Serial : WD-WXB1E62DDZ88
Firmware : 01.01A01
Capacity : 320 GB (625 142 448)
 

 

 

SHOW READ FIX PROBLEM SOLVED 

 

Case study 41 | Seagate 2TB LED:00000047 FAddr:FFFFFFFE issue

LED:00000047 FAddr:FFFFFFFE

 

 try red pins first, and if they not work, try yellow pair

http://imgur.com/gksd95B.jpg
Recov servo mean you can not read the platters.
good luck

    Model : ST500DM002-9YN14C
  Serial : S1D24F2V
Firmware : CC4C
Capacity : 500 GB (976 773 168)

  MCMainPOR: Start:
 Check MCMT Version: Current
 MCMainPOR: Non-Init Case
 MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
 MCMainPOR:  MCMT SEC copy valid
 MCMainPOR: MCTStateFlags 0000002A  MCStateFlags 000000C1
 MCMainPOR: MC off and MCMT empty
 MCMainPOR: Feature Disabled...
[SR] 0000
[SR] 0000
[SR] 0000
RAW ON After Spinup for counter=0x00002000, BlkAddr=0x00000000000AD831

DLF READY TO BY FIX AFTER READY 100 %DONE

Boot 0x40M
Spin Up
TCC-0019[0x000065B4][0x00006A20][0x00006E8C]
Trans.

Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-0019
(P) SATA Reset

MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
MCMainPOR: MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 0A61
Nonvolatile MCMT sequence number 0002446E
[RSRS] 09CA
ProcessRWError -Read- at LBA 000000000007EA56 Sense Code=40000087
ReadFooters (Forward): Segment 09CA StartLBA 00000000003F52B0 Starting Footer LBA 00000000003F52F8
SeqNum 0002446F TotalUserBlocks 0000
ProcessRWError -Read- at LBA 000000000007EA5F Sense Code=40000087
Valid Footer Obtained: ID/Seq D0D0CAFE 0002446F D0D0CAFE 0002446F
[SW] 002A
Reconstruction: Completed 1: Reconstruction occurred
[MCMTWS]
Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-0019
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE

 To fix, I shorted the PCB to get terminal access...drive still was BSY. Then, forced my way to edit model 93, uncheck all boxes and saved to the drive.

Drive would still read very slowly (about 1MB/second most of the time), with errors. It was definitely at the end of its life. But, we were able to target the data with DDI and mirror only the used data sectors, getting a full 100% clean recovery of the user's data.

 

Case study 40 | LED:0x000000BD FAddr:0x00008004

  LED:0x000000BD FAddr:0x00008004]

 PROBLEM : NO DATA READING 

 SOLVED /CU10 RUN AFTR  WORKING

    Model : ST2000LM007-1R8174
   Serial : WDZAX86K
  Firmware : SDM2
  Capacity : 2 TB (3 907 029 168)

Case study 39

    Model : ST500DM002-1BC142
  Serial : Z2ABPJE9
Firmware : JC4B
Capacity : 500 GB (976 773 168)

PROBLEM : NOT DETECTING NOW SOLVED 

93 EDIT AFTER READY