+91 70921 14411

Professional Data Recovery Services

Sunday, April 25, 2021

The New PC-3000 Flash Software Ver. 7.5.11 is Available!

 

The New PC-3000 Flash Software Ver. 7.5.11 is Available!




A SHORT LIST OF THE MAIN ENHANCEMENTS

 ENHANCED SanDisk 8Sec translator for TLC memory algorithm
 ADDED SanDisk 8Sec translator for MLC memory
 ADDED assembly translator algorithm for SM3268 / SM3269 based drives
 ENHANCED SM2704 Translator Algorithm
 ENHANCED SSS6677 Translator Algorithm. Now the assembling algorithm can search the damaged copies of translator tables and reconstruct a working copy from the partially working tables
 ENHANCED PS8210 Translator Algorithm
 ADDED support for NAND QLC Intel / Micron N18 chips
 ADDED a specialized method for data analysis and image building for FAT32-based file systems: “Image based on analysis (FAT32)”
 ADDED BUS pinout detection for the Spider Board adapter.

A DETAILED LIST OF ENHANCEMENTS:

 ENHANCED SanDisk 8Sec translator for TLC memory algorithm:
  • support of new types of firmware and new types of internal structures
  • checking procedure of ECC structures inside the translator tables
  • detailed information about image building procedure now display in log
  • added support of COLB1S5211C1e30r firmware modification
  • added support of COLB1S5211C0t30m firmware modification
 ENHANCED SanDisk TLC translator to work with drives that have offsets in the SLC block
 ADDED SanDisk 8Sec translator for MLC memory:
  • both UFD and SD / MSD drives are supported for image assembling
  • added support for 00ACP01X firmware modification
  • added support for COLB1S5211C1b30o firmware modification
 ADDED the ability to detect the shift of the ROOT folder in the expected place for Sandisk MLC / TLC image building algorithms. Information about the possible shift will be displayed in the log
 ENHANCED image assembling digitalization of the log in Sandisk MLC and TLC translators
 ADDED assembling translator algorithm for SM3268 / SM3269 based drives
 ENHANCED SM2704 Translator Algorithm
 ENHANCED SSS6677 Translator Algorithm. Now the assembling algorithm can search the damaged copies of translator tables and reconstruct a working copy from the partially working tables
 ENHANCED PS8210 Translator Algorithm
 ADDED support for NAND QLC Intel / Micron N18 chips:
  • Intel 29F512G08EBHAF [89D40C32 AA]
  • Micron MT29F1T08GBCAG [2CD40C32 AA]
 ADDED the new feature of voltage control in the ID reading mode . Now it is possible to read the ID with 1.8V and 3.3V for VCC and VCCq circuits. It helps to read the new 1.8V NAND chips by default without the necessity to change the power parameters in the PC-3000 Flash Power Control Adapter settings
 ADDED a new algorithm of marker parameters detection for image building by Block Number Type 1 [0000]. It helps to detect the correct mask parameters for different cases
 ADDED a specialized method for data analysis and image building for FAT32-based file systems: “Image based on analysis (FAT32)”

This method, based on deep analysis of FAT structures, in some cases allows you to get a high-quality logical image. The method turns out to be irreplaceable in tasks where there is no translator algorithm for image building or there is no marker in SA area (FC1178/79, SSS6696, SSS6697, SSS6698, TC58NC6623, CBM2199a and other noname controllers). You can learn more about this method in our article

 ADDED BUS pinout detection for the Spider Board adapter. This new feature allows to detect the pins of I/O data lines in case if those pins were unknown. You can read more about this in our article
 ENHANCED the “Visual cutting of sectors in a block” tool. Added auto-detection of clipping formula and group clipping of selected pages by pressing the [Space] key
 ADDED support for basic read commands with a 4-byte block address. This allows you to read large-capacity chips where the block addressing goes beyond 3 bytes
 ADDED the ability to enter values ​​in the hexadecimal form to the dialog for editing the channel synchronization table. A flag that allows you to apply the entered value immediately after entering has been added as well
 ADDED an additional “XOR Next 2 Byte” flag in the mode of deleting Bad Bytes by BitMap. It is useful when working with dumps of AlcorMicro controllers
 ADDED the ability to show on the screen the voltage control dialog of the supply circuits simultaneously with Reading the ID of NAND chips. That allows you to control the supply voltage directly in the process of reading the identifier
 ADDED output to the protocol in the reread mode based on external files. That allows you to evaluate which file is applied for each range
 ADDED a flag to the dialog for editing the protocol time parameters. That allows to save the specified values ​​not only for the current task, but also as initial values ​​for all subsequent tasks
 ADDED Resources:
  • Static XORs

No comments:
Write comments

Lost Your Data ? Need Data Recovery Service ? Contact - http://www.raminfotechdatarecovery.com/
Join Our Newsletter