WDC WD40NMZW-11GX6S1

 

 

    Model : WDC WD40NMZW-11GX6S1
  Serial : WD-WX31D68RUNY5
Firmware : 01.01A01
Capacity : 4 TB (7 813 971 632)

 

 

 

 Reading method.......................... : <HDD Profile>\Data\190now.rpm
Translator data reading (CMD)........... : Ok
Translator data decode.................. : Ok
BAD node count.......................... : 0
Root node............................... : Correct
Node state set.......................... : Ok
Intersection check...................... : Complette
Lost LBA area........................... : NONE
Wrong entry nodes....................... : NONE
Zero areas check........................ : Complette
Zero LBA area count..................... : 25 148 (61.623%)
T2 analysis............................. : Completed
Original T2 module reading.............. : Ok
T2 module meta data reading............. : Ok
T2 data encoding........................ : Ok
T2 data applying........................ : Ok
Module file saving...................... : <HDD Profile>\Data\190new.rpm
Original T2 module reading.............. : Ok
T2 module meta data reading............. : Ok
T2 data encoding........................ : Ok
T2 data applying........................ : Ok
Module file saving...................... : <HDD Profile>\Data\190new.rpm
Module writing.......................... : Ok
ROM Backup.............................. : <HDD Profile>\Data\SAAutoBackup\ROM\ROM-2023-10-30-13-27-04.bin
Drive power supply...................... : OFF
Drive power supply...................... : ON
Drive identification reading ........... : Ok
 
SED key checking
Key 018D................................ : Module 18D not found
Key 018E................................ : Module 18E not found
Encryption.............................. : Self Encryption HDD v2
Key 018D................................ : Module 18D not found
Key 018E................................ : Module 18E not found
SED key checking
Key 018D................................ : Module 18D not found
Key 018E................................ : Module 18E not found
Encryption.............................. : Self Encryption HDD v2
Key 018D................................ : Module 18D not found
Key 018E................................ : Module 18E not found
External encryption key checking
UA key reading:7 813 965 856............ : Ok
SA key reading:Copy 0................... : Ok
SA key reading:Copy 1................... : Ok
 
UA key reading:7 813 967 235............ : Ok
SA key reading:Copy 0................... : Ok
SA key reading:Copy 1................... : Ok
 
UA key reading:7 813 965 832............ : Ok
SA key reading:Copy 0................... : Has been already read
SA key reading:Copy 1................... : Has been already read
 
UA key reading:7 813 971 592............ : Ok

Total 586 Gb daat reovery Done
 

WDC WD60EFRX-68L0BN1

   Model : WDC WD60EFRX-68L0BN1
  Serial : WD-WX11D388C2UA
Firmware : 82.00A82
Capacity : 6 TB (11 721 045 168)

FHDD UTS PC-3000

 NEW VERSION PCB
不支持读写ROM版本：The PCB Version not support read and write ROM:
1：PC-3000 for WD USB 800067  [ Support Express/UDMA/portable SATA1]
2：PC-3000 for WD USB 800069  [ Support Express/UDMA/portable]
3：PC-3000 for WD USB 810003  [ Support Express/UDMA/portable SATA1]
4：PC-3000 for WD USB 810012   [ Support Express/UDMA/portable]
5：PC-3000 for WD USB 810033  [ Support Express/UDMA/portable ]（810067 PORTABLE SATA1）
6：PC-3000 for WD USB 810035   [ Support Express/UDMA/portable SATA1]
7：PC-3000 for WD USB 800041   [ Support Express/UDMA/portable]
8:  PC-3000 for WD USB 800086   [ Support Express/UDMA/portable]

 

 

 

1.   65系列 800067--USB PCB 3.0  /  810003- TYPC PCB  /SATA PCB    800065-charger

2.   66系列 800069-USB PCB  3.0  /   800086-TYPC-PCB  /SATA PCB    800066   palmer

3.   22 系列 800041-USB PCB 3.0  /   810012-TYPC PCB  /SATA PCB     800022（3T有些板不支持sy4T以上盘）-sye

4.   30 系列 810035-USB PCB 3.0  /  810033-TYPC  PCB  /SATA PCB     810030  5tb sy2

 Note the following three：

1: 800069=800066=800086
(These 3 types of PCB ROM contact points are the same, you can use any of the above types of PCB to read ROM, these 3 types of PCB can be interchanged in order to read ROM.)
2: 800067=810003=800065
(These 3 types of PCB ROM contact points are the same, you can use any of the above types of PCB to read ROM, these 3 types of PCB can be interchanged in order to read ROM.)
3: 810033=810035=810030
(These 3 types of PCB ROM contact points are the same, you can use any of the above types of PCB to read ROM, these 3 types of PCB can be interchanged in order to read ROM.) 

Some new and popular Western Digital USB HDDs are encrypted,,,,

You must use the original PCB of patient HDD to read the data. If you change the PCB, the data will be encrypted.
Use the PCB-FHDD UTS PC-3000 adapter just remove 4 capacitors .
No need to solder 4 data wires, which can increase data security
The users can image the patient HDD or extract the lost data directly by SATA interface

.

This PCB-FHDD UTS has its advantages:

No need to solder wires for Original PCB of patient HDD , But, Read the data easy, This method will not damage the original PCB and just remove 4 capacitors that will improve data security, The new test point PCB of HDD is small in size, not easy to Welding wires, The USB PCB of patient HDD to Soldering wires with new young engineers is difficult and has a very high risk of easily damaging the PCB!!!

WDC WD50NDZW-11BHVS1

   Model : WDC WD50NDZW-11BHVS1
  Serial : WD-WXC2DB144HF7
Firmware : 01.01A01
Capacity : 5 TB (9 767 475 632)

WDC WD40NDZW-11BHVS1- Case Solved

    Model : WDC WD40NDZW-11BHVS1
  Serial : WD-WX12D12939FK
Firmware : 01.01A01
Capacity : 4 TB (7 813 971 632)

HDD. Seagate F3. How to fix SIM Error 1009 RW Error 00000080 on Sentosa family

SIM Error 1009

RW Error 00000080

It means that drive has problem with S.M.A.R.T partially with system file 0x017A

Let check it terminal

 

All data is available and we can save it.

And link for a good 17A system file

Doner

    Model : ST2000LM007-1R8174
  Serial : WDZL3456
Firmware : EB01
Capacity : 2 TB (3 907 029 168)

 RECOV Servo Op=0195 Resp=0005
6Gb Max Speed lowered to 3Gb for Intel bug
Send Status: COMRESET seen
CSpd= 3Gbps
FIS34
Janus.R1.SATA.Rosewood.Mule.Servo376.Rap30.4K + SMR Despo DFW B
Product FamilyId: AF, MemberId: 01
HDA SN: WDZL3456, RPM: 5425, Wedges: 178, Heads: 4, OrigHeads: 4, ActiveHdMap: 000F, Lbas: 00001D593D47, PreampType: 82 10
Bits/Symbol: C, Symbols/UserSector: 0, Symbols/SystemSector: 0
PCBA SN:     E9426F8G, Controller: JANUS_R1_SATA(2212), Channel: Unknown, PowerAsic: KONA Rev A042, BufferBytes: 8000000
SF ID: EF 14, SF Part Size: 400, Flash Used: 400
Package Version: R1AEA069E.SDM4.AA4901.EB01    , Package P/N: 100849195, Package Global ID: 00305567,
Package Build Date: 01/22/2019, Package Build Time: 20:23:31, Package CFW Version: R1AEA069E.SDM4.AA4901.01618036.00305567.EB01    ,
Package SFW1 Version: 9E7B, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----
Controller FW Rev: 01222023, CustomerRel: EB01, Changelist: 01618036, ProdType: R1AEA06.SDM4, Date: 01/22/2019, Time: 202331, UserId: 00305567
Servo FW Rev: 9E7B
TCG IV Version: 30.05
Package BPN: 7
RAP FW Implementation Key: 1E, Format Rev: 0208, Contents Rev: 84 07 01 00
Active BFW Container: 0
4K Sys Area: 1
Features:
- IOEDC enabled
- IOECC enabled
- DERP  enabled v. 7.0.00.0000000000000000
- LTTC-UDR2 compiled off
- SuperParity 4.1 enabled OTF OC enabled
   TotalSuperBlks     TotalValidSuperBlks
   00175A69           001757D1
- UMP Zone Group 0004 to 0005
   TotalSuperBlks     ValidSuperBlks
   000044EC           000044EC
- Humidity Sensor disabled
- Media Cache Partition enabled
- Media Cache enabled
- Low Current Spin Up enabled
- Torn Write Protec

TOSHIBA MQ04ABF100

    Model : TOSHIBA MQ04ABF100
  Serial : 994ECZY5T
Firmware : JU004C
Capacity : 1 000 GB (1 953 525 168)

 

 ECC ON.................................. : ECC ON error; Device Error Detected 51/04 (ABR)
 
Tech ON................................. : Device Error Detected 51/04 (ABR)
 

Solved

Due to Tech key is not recognizable, there re no firmware access and heads map not building.
You can try to initialize drive by PCB isolation. Important that tech.key should be recognzied, then be possible to build heads map.
1. Turn off the power supply and isolate Heads contacts on PCB.
2. Turn on the power supply. Now disk BUSY.
3. Perform Soft reset (F7), if it doesn’t help then perform Hard reset (F8).
4. Now drive get a ready state. Then perform Sleep (Standby) comamnd. Go to “Tools” -> “HDD” -> “Standby”
5. Remove isolator from Heads contacts. Set PCB back to HDD and try to read Drive ID.
6. Re-launch utility, check tech.key message in the log report.

TOSHIBA DT01ACA100

    Model : TOSHIBA DT01ACA100
  Serial : 941SGYSNS
Firmware : MS2OA750
Capacity : 1 000 GB (1 953 523 055)